| Dimensions | 165D x 483W x 89H mm |
| Weight | 5.5kg |
| Maximum Gain | XLR to XLR: 83dB
|
| Maximum Gain | 1/4 inch
to 1/4 inch 65dB |
| Dynamic Range | >100dB
(20-20KHz) |
| Frequency Response | 10Hz
to 20KHz (+/- .5dB) |
| Low-Cut
Filter | Variable; -3dB@10Hz to 250Hz |
| Input/Output
Connections | XLR balanced & 1/4 inchunbalanced |
| Insert Connections | 1/4 inch unbalanced |
| Input Impedance | 1.67k ohms (XLR),
1M ohm (1/4 inch) |
| Output Impedance | 600
ohms (XLR), 300 ohms (1/4 inch) |
| Maximum
Input Level | +15dBu (XLR), +21dBu (1/4 inch) |
| Maximum Output Level | +27dBu (XLR), +22dBu (1/4 inch) |
| Equivalent Input Noise | -130dBu
(XLR to XLR, A-weighted) |
| Phantom
Power | +48v DC (switchable) |
| Compression
Ratio | Variable: 2:1 to >10:1 |
| Attack
Time | Fast: 2ms (optical), 0.5ms (vari-mu) |
| Attack Time | Slow: 15ms (for 20dB of comp) |
| Release Time | Fast: 300ms, Auto:
100ms-3sec |
| Maximum Compression | 30
dB (optical), 23dB (vari-mu) |
| EQ
Frequency Bands | Low Shelf: 40Hz/120Hz selectable |
| EQ Frequency Bands | Low-Mid: Sweepable 20Hz to 200Hz/
200Hz to 2KHz |
| EQ Frequency
Bands | Low-Mid Q: Wide/Narrow selectable |
| EQ
Frequency Bands | High-Mid Sweepable: 200Hz to 2KHz/ 2KHz to 20KHz |
| EQ Frequency Bands | High-Mid Q:
Wide/Narrow selectable |
| EQ Frequency
Bands | High Shelf: 6KHz/18KHz selectable |
| Boost
and Cut/Frequency Band | +/-12dB (wide), +/-20dB (narrow) |
| Total Harmonic Distortion (THD) | <0.1% (typical)
|
| Tubes | Three Hand-Selected
|
| Power Requirements | 100-125
VAC, 30W (Export units configured for country of destination) |
